CPD-2000 Mobile Phone Detector

Description:

The actual operation is started by conducting detection within its range first. It will not activate the jamming device if there is no transmission signal around. Once there is any Mobil phone signal present, it will immediately inform the jamming device to activate the jamming broadcasting. The whole operation and response do not exceed 20 ms time.
Specification
Working bandwidth: 824MHz ~ 849MHz/890MHz ~ 915 MHz
1710MHz ~ 1785 MHz/1920MHz ~ 1980MHz
Cover interface standards: Digital: IDEN, TDMA, CDMA, GSM, UMTS
Analog: AMPS, NMT, N-AMPS, TACS
Sensitivity: -80 dBm
Detection Range: 15 ~ 30 M
Jamming control(Detection first): Look-Through Jamming control
Data transmission rate: 2.4 Kbps Half Duplex
Data modulation: FSK
Data reception sensitivity: 1 mV rms ( typ)
Data error rate(BER): 10 -5 ( S/N = 15 dB)
Working voltage: 12 V DC
Power consumption:
Product Highlights:
Is simultaneous detects four bandwidths (GSM/DCS/CDMA/3G) transmission signal.
Each band is designed with individual detection circuit for high sensitivity and consistency
Broad band Log Amplifier design.
Active striping filter design for high selectivity and low false alarm.
It can look through the Mobil phone signal and automatically activate the jamming device to break the communication when needed. Therefore it can eliminate the health concern of always-on jamming radio wave to human body.

CPD-2000 Mobile Phone Detect