Low Power Bluetooth Module SPP Class 2 , CSR BC4 Bluetooth USB
This is a Bluetooth Class2 (max 4dBm) module with miniature size of
14x12x2.2mm. It is based on CSR Bluecore 4 chip set which can
support Bluetooth V2.1+EDR standard. With regular SPP profile, the
module can support maximum baud rate up to 921.6Kbps at its UART
interface. The AT command set allows the host to configure the
module or the communication parameters, which makes the module very
flexible but easy to use. Beside of the SPP profile, the module is
also suitable for data communication applications such as DUN, OPP,
FTP, PBAP and HID. Voice applications such as HSP and HFP are also
possible by using with external voice CODEC via PCM bus. USB
interface is included which can be used as a USB to wireless UART
RS232 cable replacement.
Wireless USB to wireless COM port converter.
Wireless keyboard or Wireless mouse
Heath care equipements.
Flexible and cost effective
Low power consumptions of only 80mW
Compact Bluetooth stack firmware, easy to use.
-6dBm to +4dBm
Program Flash Memory
USB and UART
3.0V – 3.6V