Safety BioHpp Crown Good for the Gingiva after restoration
BIO HPP elegance hybrid abutments
Predestined for individual solutions
The hybrid abutment BioHPP® elegance has a titanium base, which is
available for the majority of implant systems - with the original
level of quality.
The unique procedure, from the conditioned titanium surface and the
thermoplastic manufacture to the protected design, guarantee a
gap-free and integral bond. The BioHPP abutment in the individual
from comprises a completely gap-free and intergral base.
Any requirements of tooth or gingival situations can be easily
resolved thanks to the easy processing and reworking of BioHPP®. In
contrast to hard or brittle materials, BioHPP® can even be reworked
easily, quickly and without risks in the mouth itself
Safety against bacteria
Gap-free and adhesive-free hybrid abutment Always the perfect fit,
no adhesion necessary and therefore more easily sterilised.
Long-term safety against the penetration of bacteria.
Semi-crystalline BioHPP® and titanium surface Alpha case surface
clear, enlargement 100:1
Good for the gingiva
Gum irritation is ruled out due to the surface quality of the
material and its low surface roughness of 0.018 µm RA (Jena Uni).
The excellent polishing properties of BioHPP® can be seen in its
homogeneous structure. The very small grain size of the ceramic
filler of 0.3 to 0.5 µm forms the basis for this.
Two extracted gingiva formers (BioHPP® and titanium) - the
ring-shaped injury shows that the gingiva has bonded better with
the BioHPP® abutment than with the titanium abutment.
Images from the Department of Implantology at Dental Clinic IRCCS
Fondazione Policlinico Ospedale Maggiore Università degli Studi di
Convenient processing as a principle
This material is extremely easy to handle. Product and processing
variants, processing, customisation, reworking and polishing can be
carried out quickly and without problems with the conventional
procedure. Even intra-oral processing is totally simple and
stress-free. The positive material properties are constantly
maintained in contrast to hard and brittle materials.
Individually modelled (titanium base) The key to the system is the
titanium base, which is easily and conveniently over-pressed with
BioHPP in individual modelling procedures®. The procedure is one
that a dental technician is very familiar with.
Ready-to-use - crown abutments Order an individual BioHPP® abutment
from a laboratory you trust and the laboratory will already have
veneered this with, for example, visio.lign. Simply insert this,
screw it tight and close the screw channel with a light-curing
composite. The results do not differ from a natural tooth in terms
of their appearance or wearing comfort.
Comfort for the patient:
I don't even notice that I have gaps anymore, either when looking
in the mirror or when feeling around with my tongue! I can chew
like I did before! I have never been as happy as I was after this
dentist appointment. I look better than I did before. Brilliant! I
only had to walk around with gaps in my teeth for one day. The
price was no problem either!
Integrated in the CAD/CAM workflow (prefab)
After (oral) scanning, the individual restoration is planned in the
CAD system and the corresponding order is sent to the laboratory or
even created whilst the patient is sitting in the dentist's chair.
The individual abutment also has excellent scanning properties, so
the order for the corresponding crown (whether in visio.lign, HIPC,
zirconium, ceramic, metal or lithium disilicate) can also be easily
produced in the same workflow.
You can quickly find the right shape for most patients from a
selection of three different sizes (S, M, L) and two angles (0° and
15°). The prefabricated abutments are designed as a prepared stump,
providing the best possible basis for further processing. If the
designs on offer will not work, particularly due to the condition
of the gingiva, you can simply order an individual pressed abutment
from your laboratory.