Categories | Endless Round Slings |
---|---|
Brand Name: | Dahua Sling |
Model Number: | web sling |
Certification: | BS EN 1492-1:2000 |
Place of Origin: | China |
MOQ: | 1000 pcs |
Price: | USD 30,000 / 20'GP |
Logo: | We do it oursleves |
Eye protector: | White Black or same as webbing |
Material: | 100 % polyester |
Layer:: | 1 layer |
packing: | Blank or printed |
Sling type: | endless flat webbing sling |
W.L.L: | 3000KG |
COLOR: | Yellow |
standard: | BS EN 1492-1:2000 |
One Way Slings disposable endless Sling for tubing lifting & pipe industry & lifting boats bargets
Product Name | Round sling |
Material | Polyester, nylon, polypropylene, |
Standard | European Standard EN1492-2:2000 and Chinese Standard JB/T8521-2007 |
Capacity | 1t~3000t |
Size | 1m-100m |
Features | *Highly flexible and adaptable to given shapes, especially suitable
for loading round objects *Anti-abrasion and anti-incision protection sleeve can be attached *Heat resistant up to 100°C *High strength/weight ratio *Usage life last longer *Protection against cargo surface damage *Safety factor: 5:1, 6:1, 7:1, 8:1 |
Packing | Carton, wooden case or according to your requirement |
Delivery Time | 20-40days, based on Qty |
Application | lifting, loading &unloading, pipe laying |
Capacity
The sling must be both long enough and strong enough for the load
and the slinging method. Apply the mode factorfor the slinging
method. For use at temperatures exceeding 80°C or below 0°C refer
to the suppliers instructions. Ifthe slings are used in multi-leg
arrangement the angle formed between the legs should not be less
than 30° orgreater than 90°. If abrasion, heat generated by
friction or cutting from edges or corners are likely, select a
slingfitted with protective sleeves and/or use suitable packing.
Storing and Handling Belt Slings
Never return wet, damaged or contaminated slings to storage. They
should be cleaned with clear water and dried
naturally. Never force dry belt slings. Store belt slings hung from
non-rusting pegs which allow the free circulation of
air. The storage area should be dry, clean, free of any
contaminates and shaded from direct sunlight. Do not alter,
modify or repair a belt sling but refer such matters to a Competent
Person.
NOTE: The material from which the sling is manufactured may be
identified by the colour of the label or printing on
the label: Polyester = Blue, Polyamide (Nylon) = Green,
Polypropylene = Brown and the sling may also be dyed with
a colour code to indicate SWL.
Using Belt Slings Safely
Do not attempt lifting operations unless you understand the use of
the equipment, the slinging procedures and the
mode factors to be applied. Do not use defective slings or accessories. Check the correct engagement with
fittings
and appliances, ensure smooth radii are formed, do not twist or cross
slings and do not overcrowd fittings. Position
the sling so that the load is uniformly spread over its width.
Position the bight for a choke lift at the natural (120°)
angle to prevent friction being generated. Ensure that stitching is
in the standing part of the sling away from hooks
and other fittings. Take the load steadily and avoid shock loads.
Do not leave suspended loads unattended. In an
emergency cordon off the area.
In-service Inspection, Maintenance and Replacement
Inspect slings each day before use, looking for:
Do not use worn or damaged slings or attachments. Discard or repair
them. Use damaged slings only after they are repaired,
reconditioned, and proof tested by the sling manufacturer or a
qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned
with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation.
Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for
thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage;
burns; chemical damage; solar degradation;
damaged or deformed end fittings.