Electric room Floor Heating Thermostat for Commercial buildings is
used for 2-position control with on/off output for the control the
temperature by means of an NTC sensor placed externally or
internally in the thermostat.The thermostat acquires the room
temperature with its built-in sensor or floor sensor, and the
heating contact will close when the room temperature falls below
the selected set-point.
For the control of warm-water (floor) heating systems and direct
electric heating systems used in Commercial buildings, Residential
buildings, Light industrial buildings
- Mounted on the surface of the wall indoors.
- Temperature control range +5/+40°
- Applied in the auto-control system of space heating.
- LED turned on while heating.
- Satisfying the requirements of safety, energy saving and comfort.
1. We accept payment that aliexpress can accept, We apologize that
we cannot accept other payment methods, such as cheque or postal
2.All major credit cards are accepted,and we received it in 24
3.Payment must be received within 10 business days of auction
Mounting of floor sensor:
Floor sensor should be placed in installation pipe which is
embed-ded in floor, the pipe is thickened in the end and placed as
high as possible in the concrete layer. Sensor cable may be
extended up to 50 m with separate cable f or power current. Two
conductors in a multi-conducting cable, which e.g. is used for
supply of heating cable, may not be used. Voltage signals, which
may disturb the function of the thermostat, may occur. If the cable
is used with screen,the screen may not be connected to the ground,
but must be
connected to terminal 7, the best installation is attained with a
separate cable for the sensor, which is then mounted in a separate
Temperature and Value of floor sensor:
1 x Heating thermostat
1 x 2.9m sensor cable
2 x Mounting screws
1 x English user manual
Thermostat has a scale range of +5/+40 . To assist the adjust-ment,
the thermostat has a LED which will glow RED when the heating is
ON. The thermostat should be set to maximum temperature setting
until the desired temperature of the room or floor is achieved. The
control knob should then be turned back until the LED goes out.
Fine adjustments can be made over the next 1/2 days to suit
- Q: Is there any Tracking Number for my item?
A: If you want the parcel to be tracked , please choose the China
post air mail, Singapore post, or Express
- Q: Does this product come with retail package?
A: We have declared the packing detail on the description of each
product, please check it, Thank you !
- Q: I am a reseller, I would like to buy many pieces of your item,
what's the wholesale price?
A: If you would like to buy large quantity, please send email to
us, we will give you the best price, thanks!