COC Celanese 6015S-04 Transparent film grade good toughness and high flow rate
|
Products Description COC (Cyclic Olefin Copolymer) is a polymer material with excellent transparency, low water absorption, good chemical stability, and high heat resistance. It is mainly used in the following areas: Healthcare: Due to its good ......
Dongguan Pengchen New Materials Co., Ltd
|
Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester For High Temperature
|
...Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature Summary: Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature is a high-precision melt flow tester used to test various plastics and resins in a viscous state through a certain temperature and load. The module and melt flow rate......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Plastic Testing Machine MFI Themoplastic Plastic Melt Flow Rate Index Tester
|
..., POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. It's is a high precise melt testing instruments for the measurement of melt flow rate (MFR)/(MI) and...
Dongguan Liyi Environmental Technology Co., Ltd.
|
XNR-400D Plastic Melt Flow Indexer / Plastic Melt Flow Rate MFI Tester
|
...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and...
Wuhan Bonnin Technology Ltd.
|
Plastic Melt Flow Rate Testing Equipments , LCD Plastic Testing Machine
|
...Plastic Testing Machine , Plastic Melt Flow Rate Testing Equipments Principle: Plastic Melt Flow Rate Testing Equipments (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow......
Guangdong Haida Equipment Co., Ltd.
|
Blue Belt Nasal Cannula High Flow Rate For ICU Patient
|
... 320mm MC-07103 L Green 12mm 320mm Basical Inforamtion For Nasal Cannula High Flow Rate The nasal cannula oxygen device is a medical equipment used to deliver supplemental oxygen directly to a patient's nose. It is one of the most commonly used ......
MCREAT (GUANGZHOU) BIO-TECH CO.,LTD
|
High Flow Rate Insertion Doppler Ultrasonic Flow Meter
|
High flow rate Insertion Doppler Ultrasonic Flowmeter Our High-precision DF6100-EI Doppler Ultrasonic Flow Meter can be available with 4-20mA, OCT. RS485, Pulse, ect,. Digital Flow Meter consists of flow calculator and transducer to measure velocity and level at the same time. DF6100-EI Series Doppler Insertion Ultrasonic Flow Meter can measure metal or plastic......
Lanry Instruments (Shanghai) Co., Ltd.
|
Industrial Aluminum Diaphragm Pump with High Flow Rate and Pneumatic Power Source for Wastewater Treatment
|
...High Flow Rate Aluminum Water Pump This pneumatic diaphragm pump delivers exceptional performance for wastewater treatment and irrigation applications with a maximum flow rate of 15 GPM (57 L/M). Technical Specifications Max Working Pressure 100 psi (0.7Mpa, 7bar) Max Flow Rate......
Jianglang Technology Co. Ltd.
|
UP-5004 Plastic Melt Flow Rate Testing Equipment with Wear-resistant Nitralloy Liner and 400°C Temperature Range
|
... The UP-5004 melt flow rate testing instrument is designed for determining the melt flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials including ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate,...
Dongguan Youbi Test Equipment Co.,Ltd
|
High Flow Rate Temperature Filtration Unit 40-70m3/H 60-110m3/H
|
High Flow Rate 40-70m³/h 60-110m³/h Temperature Filtration Unit Pullner's High-Temperature Filtration System is designed for water purification. This high temperature filtration unit comes with an OD of 6"(152.44mm), a filter flow rate of high, and a suggestion pressure for filter replacement of 2.5bar. It also has a maximum flow rate of 40":70m³/h;60":110m³/h. This high......
Shanghai Pullner Filtration Technology Co., Ltd.
|
Submit your “coc plastic high flow rate” inquiry in a minute :