IEC60335-2-6 Test Finger Probe Surface Temperature Probe Thermocouple Diameter 0.3K Type
|
...Test Finger Probe Surface Temperature Probe, Thermocouple Diameter 0.3K type Standard of Test Finger Probe:IEC60335-2-11 figure 101 and IEC60335-2-6-2002 figure 104. Application of Test Finger Probe:It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of drum-type dryer, upright electric cooker, cooking bench and oven. Test sample of Test Finger Probe......
Guangzhou HongCe Equipment Co., Ltd.
|
Durable Test Finger Probe 125 Mm Stop Face Diameter Lab Calibration Certification
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1, GB2099.1, IEC61032, UL standard. Parameters: 1). Finger diameter: 12mm 2). Finger length: 100mm 3). Stop face diameter: 125mm 4). Standard: IEC60335-2-14 Remark: The test probe is identical to test probe B of IEC61032 except that the diameter......
Pego Electronics (Yi Chun) Company Limited
|
Test Probe 11 , IEC61032-Figure 7 Test Finger Probe , Unjointed Test Finger
|
... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ......
KingPo Technology Development Limited
|
IEC61032 Children Safety Small Test Finger Probe 19
|
... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The...
Guangzhou Shice Equipment Co., Ltd.
|
EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm
|
... intended to verify the basic protectiion against access to hazardous parts. It’s also used to verify the protection against access with the back of the hand. Description: This probe is intended to verify protection the back of hand of persons against...
Dongguan Kingpo Technology Limited
|
Finger diameter 5.6mm ISO 8124-1 Standard Test Finger Probe for toys
|
ISO 8124-1 Standard Test Finger Probe & Accessibility Probe Product Introduction Application: Standard Test Finger Probe & Accessibility Probe is used to determine whether the hazardous parts of toys can be touched. If it is accessible, then conduct the ......
Gester International Co., Ltd
|
IEC60335-2-14 Stainless steel Test Finger Probe HT-I33
|
Test Probe HT-I33 Standard:IEC60335-2-14. Application:The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. Test sample:Hand held blender. Feature:Appliance is checked by applying a cylindrical rod......
shanghai kerang technology co ltd
|
IEC 60529 Test Finger Probe B with 10N Force for IPX Test Equipment
|
...Test Finger Probe B with 10N Force for IPX Test Equipment Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Knurled Finger Length: 8 cm Handle diameter......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC61032 IEC60529 IP2X Test Probe B Test Finger
|
... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 ......
HongKong Bonad Technology Limited
|
IEC 60065 2014 Clause 9.1.1.3 Test Probe 18 Ф8.6mm Children Finger Probe
|
...Test Probe 18 Ф8.6mm Children Finger Probe Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.1.3, IEC 61032 figure 12 test probe 18 and etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger probe......
Sinuo Testing Equipment Co. , Limited
|
Submit your “diameter 0 3k test finger probe” inquiry in a minute :