IEC60695 Compliant 220V/50Hz Horizontal And Vertical Flame Tester
|
IEC60695-compliant 220V/50Hz Horizontal and Vertical Flame Tester with 50W and 500W Power Options This device is an IEC60695 horizontal and vertical flame tester (50W and 500W), including its applicable standards, application range, test sample ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695-11-4 50W Flammability Testing Horizontal and Vertical Flame Tester
|
IEC60695-11-4 50W Flammability Testing Horizontal and Vertical Flame Tester 1. Introduction The Horizontal and Vertical Flame Tester is designed according to the requirements of IEC60695-11-4, GB/T 5169.22, IEC60695-11-10, GB/T 5169.16, GB/T2408, Section ......
Pego Electronics (Yi Chun) Company Limited
|
UL94 Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304
|
...Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
220v Horizontal And Vertical Flame Tester , SUS304 Lab Testing Machine
|
...Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Ul94 Horizontal And Vertical Flame Resistance Testing Machine
|
... provisions stipulated in the US UL94 standard and GBT2408 standard "Flammability Test of Plastic Materials for Equipment and Appliance Parts". Carry out horizontal and...
Guangdong Guangce Instrument Technology Co., Ltd
|
Foam Plastics Horizontal and Vertical Flammability Tester with MCU Control
|
...Horizontal and Vertical Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than 250kg / m3 of small plastic samples under small flames in the horizontal combustion performance. Standards ISO9772, ISO 97738 Specification 1. MCU control, read the automatic timing. 2. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame......
SKYLINE INSTRUMENTS CO.,LTD
|
Horizontal & Vertical Flame Tester UL94 Flammability Test Chamber VW-1/FT-2
|
Horizontal & Vertical Flame Tester UL94 Flammability Test Chamber VW-1/FT-2 Complied Standards & Clauses This flammability test chamber meets the requirements of the UL1581 and UL94 flame tests. Equipment Overview Ensure your wire, cable, and plastic ......
Sinuo Testing Equipment Co. , Limited
|
BVC Bunched Cable Vertical Flame Tester
|
...Vertical Flame Tester -- Model BVC Introduction: Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume. Additionally, if bunched cable vertical flame spread testers...
Delta Technology (Chongqing) Co., Ltd.
|
ISO 1210 Horizontal/Vertical Flame Tester for Polymer Material IEC 60707
|
UL94 Horizontal Vertical Flame Test Machine Introduction UL94 flame test machine is designed according to plastic Materials flammability test method. It is used to test flammability, burning rate, flame spread, burning flame retardancy. This machine has ......
Advanced Instruments Co.,Limited
|
GB/T5456-2009 Vertical Flame Tester Flammability Testing Machine For Fabric 26mm
|
...Vertical Flame Tester Flammability Testing Machine For Fabric 26mm Test standard GB / T5456-2009,ISO6941 : 2003 Technical parameters Technical Index HD-W821 Control method 7-inch color touch screen, can set and display ignition time and flame spread time Machine size 410mm(W) X 900mm(H) X 380mm(D) Ignition time 0 ~ 999.9s can be set Flame spread time 0 ~ 999.9s can be set Flame angle 30 º& 90° Flame......
Haida Equipment Co., Ltd
|
Submit your “horizontal and vertical flame tester” inquiry in a minute :