Wedge probe | 30 / 30 / 40mm Knurled Length Wedge probe IEC62368-1-Figure V.4
|
Wedge probe IEC62368-1-Figure V.4 Reference Standard: IEC62368-1-Figure V.4 Calibration Certificate:Figure V.4 Wedge probe.pdf Technical Parameters: Test finger length 234mm Knurled length 30/30/40mm Material stainless steel and nylon Reference IEC62368,......
KingPo Technology Development Limited
|
IEC60950 Standard Wedge Probe Safety Test For Paper Shredder Inlet
|
Wedge Probe Designed according to IEC60950 for Paper Shredder Inlet 1. Introduction Wedge probe is designed according to UL60950 figure NAF.2 and NAF.3, IEC60950 and IEC62368 figure V.4, it is for safety test of paper shredder inlet. 2. Application It is applied to test the protection against the slot opening of paper shredder inlet, the probe can not access to the hazardous moving parts. 2. Specification Distance from Probe Tip (mm) Probe...
Pego Electronics (Yi Chun) Company Limited
|
IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders
|
... to the opening: − with a force up to 45 N for a strip-cut type device; and − with a force up to 90 N for a cross-cut type device. Test Finger Probe NOTE Media destruction devices are typically identified as either...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60950-1 Figure EE.1 Figure EE.2 Wedge Probe For Testing Document Shredders
|
...Wedge Probe for Testing Document Shredders Product Overview: This wedge probe meets the requirements of IEC 60950-1 Figure EE.1 and Figure EE.2, clause EE.5, it is used to check the protection against hazardous moving parts. The force is achieved by working with a force gauge, there is a M6 thread hole on the handle of probe which can match a force gauge. Application: The wedge probe......
Sinuo Testing Equipment Co. , Limited
|
IEC 60950-1 Fig NAF.2(S5366) Wedge Probe For Testing Document Shredders
|
...wedge probe is a new accessibility probe required by the standard of IEC 60950-1 Fig NAF.2(S5366) and NAF.3(S5370) as well as BS 60950.1108/260/CD for paper shredders. It is used to test whether the hazardous parts of shredder can be touched by people. The probe......
Dongguan Kingpo Technology Limited
|
Factory Price UL 60950 Wedge Probe for Paper Shredders
|
... Wedge Probe is a high precision probe made in exact accordance with UL and IEC standards such as UL60950 Figure NAF2 and NAF3. Company introduction HK LEE HING INDUSTRY CO., ......
HK LEE HING INDUSTRY CO., LIMITED
|
High Temperature Wedge / Probe Shoe Of DA Series Replacement Delay Lines Dual Probes One Pair
|
High temperature wedge/ probe shoe of DA series dual probes one pair...
TMTeck Instrument Co., Ltd
|
Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
IEC62368 Figure V.1 V.2 V.3 V.4 V.5 Telecom Terminal Test Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|
IEC62368 UL Stainless Steel Accessibility Probe Nylon Handle
|
... in the enclosure protection test of the electrical equipment. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Nylon handle + probe, it is manufactured according to the...
shanghai kerang technology co ltd
|
Boiler Ultrasonic Flaw Detector MITECH Industrial Ultrasonic TOFD Wedge
|
... and improve probe efficiency.TOFD probes and wedges produce refracted longitudinal waves in steel that can be used to quantify cracks through diffractive time-difference techniques and are used for the detection of welds in ......
Mitech CO.,LTD.
|