Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1
|
...Luminaires Torque Load Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rotational force shall have adequate mechanical strength. The joints between these parts shall be subject to a 50N torque force for one minute. Each joint shall be tested...
Pego Electronics (Yi Chun) Company Limited
|
Stainless Steel IEC Test Equipment , IEC60884 Socket Outlet Torque Balance Test Apparatus
|
...Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus......
Guangzhou Shice Equipment Co., Ltd.
|
BS EN 12983-1 Cookware Handle Torque Resistance Test Apparatus
|
...Torque Resistance Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformation cannot affect the function of the handle. After the test, the fasteners are not loosened. It is used to evaluate the torque......
Sinuo Testing Equipment Co. , Limited
|
50Mpa Digital Point Load Test Apparatus For Rock Specimens
|
...Load Test Apparatus for Rock Specimens Digital Point - Load Test Apparatus for Rock Specimens Small MOQ: we accept small quantity order to supports our cooperation. Excellent quality with competitive price: All our products are made in China and with competitive price. OEM / ODM service: We can offer OEM & ODM service. STANDARD: ASTM D-5731 This apparatus......
HUNAN MEGA DRILLTECH CO., LTD.
|
Ground Recessed 20KN LED Light Testing Equipment For Static Load Test
|
... to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment is controlled by PLC electrical system, the whole operation is controlled on the...
Dongguan Kingpo Technology Limited
|
Movable Ingress Protection Test Equipment Luminaires 3 Heads Water Spray Test Apparatus
|
... the ballast or device lampholder compartments. Confirm to standards: UL484; UL1598; UL1993 and so on. Test sample: Self-ballasted lamps and lamp adapters and other luminaires. Feature: Adopt aluminum structure, splash structure can be adjusted; adopt the...
Guangzhou HongCe Equipment Co., Ltd.
|
Laptop Hinge Torsion Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine
|
...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test for the hinge, it can measure the torque......
Infinity Machine International Inc.
|
Electric Vehicle Charging Station Cable Anchorage Pull Force And Torque Test Apparatus
|
...Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Equipment Overview The weight is used to apply tension, and the weight and the torque arm realize torque. The PLC is used to control the number of tensions and the torque test time. When the number of tests or the test......
Sinuo Testing Equipment Co. , Limited
|
1920HZ Precision Torque Screwdriver Tester，Torque Wrench Calibrating Apparatus
|
... design and manufacture of an intelligent multi-function measuring instruments. Mainly used to detect and correct a variety of torque screwdriver, a variety of products involved in the test of tightening force, parts torque destructive test. With...
NANBEI INSTRUMENT LIMITED
|
IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
KingPo Technology Development Limited
|
Submit your “luminaires torque load test apparatus” inquiry in a minute :