Home > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Cable Manufacturing Equipment >

Manual Operation Cold Bend Test Apparatus

1-10 Results for

manual operation cold bend test apparatus

from 42 Products

Manual Operation Cold Bend Test Apparatus For Cables External Diameter Less Than 12.5mm

... cross-section having an external diameter up to and including 12.5 mm and for sector-shaped cores when it is not possible to prepare dumb-bells. Cable Testing Equipment If required by the standard for the type of cable, the test shall be...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment

Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the test......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Manual Control Cold Bending Strength Testing Machine IEC60811 1 4

Cold Bending Test Machine HDX1307 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, providing Appliance Test Equipment, Medical Device Testing Equipment, Waterproof ......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

IEC 60335-1 Electrial Appliance Flexible Cable Power Cord Bending Resistance Flexing Test Apparatus

...Bending Resistance Flexible Cable Flexing PLC Control Testing Apparatus Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.14 IEC60884-1:2013 “Plugs and socket-outlets for household and similar purposes- Part1:General requirements” clause 23.4 IEC60745-1:2006 “Safety of hand-held motor operated......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

12 Sets Finished Sole Bending Test Machine / Cold Resistance Bending Leather Testing Machine

...Bending Test Machine/Cold Resistance Bending Leather Testing Machine Specifications: 1. Testing the resistance of bending of finished shoes 2. Easy operation Product usage: Finish Shoe or Sole Flexing Test Equipment is suitable for testing the soles, finished shoes to the resistance to bend nature, or check the location and extent of cracking in order to improve product quality. Specifications: Bending......

Dongguan Zhongli Instrument Technology Co., Ltd.

Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China

Cba-II Hot Sale Manual Type Circuit Breaker Test Equipment

... Manual Type Circuit Breaker Test Equipment adopts micro controller unit(MCU) to control the testing process. CBA-II High Voltage Vacuum Type Circuit Breaker Test Apparatus is intelligent, multi-functional, accurate, stable, portable, easy to operate, etc....

Delta Technology (Chongqing) Co., Ltd.

Address: No.85 Zhong Shan Yi Road, Yu Zhong District, Chongqing, China. 400010

EIA Wire Cable Bending Test / Cable Testing Tools PLC control technology

...bending tester ( MY-EIA-C3) with competitive price, both OEM and ODM available from us Technical Specification 1. Test Station 3 (Independent Operation) 2. Count the number of times of wire breakage and power failure saving tests 3. The number of times can be set in the range of 0-999999 times and can be manually set arbitrarily. 4. The bending......

Shenzhen Mingyu Instrument And Equipment Co., Ltd.

Address: No.2 plant, Henglu Industrial Zone, Songgang Town, Bao'an District, Shenzhen, China, 518105.

HUT-600C Hydraulic Servo Universal Testing Machines, steel strand type, Manual operation box

...: The HUT-2000B series of microchip controlled Electro-hydraulic servo universal testing machines is mainly designed for tension, compression, bend, shear on metal, and non-metal materials. This product series features a bottom-mounted hydraulic cylinder;...

jinan hardness STING EQUIPMENT CO., LTD

Address: No.87 Southern Outer Ring Road, 250022 Jinan, China

Iqualitrol Digital Brinell Hardness Test Apparatus With 20X Digital Measurement Microscope

Load Cell Control Brinell Hardness Tester with 20X Digital Measurement Microscope Technical Data Download: iqualitrol Brinell Hardness Tester SHB-3000D Operation Manual Download: iqualitrol SHB-3000D Operation Manual Brief Introduction: SHB-3000D Digital ......

Dongguan Quality Control Technology Co., Ltd.

Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046

Submit your “manual operation cold bend test apparatus” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Quality Control Technology Co., Ltd. Products: Iqualitrol Digital Brinell Hardness Test Apparatus With 20X Digital Measurement Microscope
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “manual operation cold bend test apparatus” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0