circular stop face test probe b

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

...Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... with circular stop face Φ 50 mm 1.Knurled Finger Diameter:12mm 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:PEGO Electronics

Model Number:PG-TPB

Place of Origin:China

..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the mechanical strength of enclosures, guards and simliar parts. 2. Specification Model PG-TPB-1 ...

Brand Name:Sinuo

Model Number:SN2210-2A

Place of Origin:China

... with a diameter of 50 mm, instead of the non-circular face, is intended to verify that the moving parts of appliances shall, as far as is compatible with use and working of the appliance, to be positioned or enclosed to provide adequate protection against

Brand Name:JLX

Model Number:LX-12580

Place of Origin:Made in China

Test Finger Probe with 125mm * 80mm Circular Stop Face The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular face, the distance between the tip of the test finger and the stop face...

Brand Name:KingPo

Place of Origin:China

...Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop