dynamic method elastic modulus tester

Brand Name:GTJ

Model Number:GTJ-EVD

Place of Origin:China

... used to determine the deflection capacity of the subgrade under the dynamic load, thereby evaluating the bearing capacity and deformation of the subgrade. It is applicable to the monitoring and inspection of foundation construction quality of railways,

Place of Origin:China

Brand Name:KeRang

...L ＜ 80 mm Deformation resolution: 0.01mm. Control deformation rate: 0.01 mm / S ~ 1 mm / S Printing method: the test conclusion can be printed 10 times at a time. Net weight: 11kg Boundary dimension: 400 × 290 × 260 (mm) 5.7-...

Brand Name:SINOWON

Model Number:SU-400H

Place of Origin:Dongguan, China

...Tester SU-400H Brief Introduction: ● SU-400 Dynasonic Hardness Tester is a universal portable durometer with twin—testing-method. It applies twin-method about state ultrasonic contact impedance: UCI and dynamic rebound: Leeb to make hardness testing in one instrument, it solves the dilemma that Leeb method can not test the hardness of plating and coating (in UCI), and UCI method...

Brand Name:Sinowon

Model Number:SU-400

Place of Origin:Dongguan/China

...Tester Integrate Dynamic and Static Methods Brief Introduction: SU-400 is a combined portable hardness tester which integrated the ultrasonic hardness testing method and dynamic Leeb hardness testing. It supports not only the UCI measurement of ultrasonic including manual probe 1kg, 2kg, 5kg, 10kg and motorized probe 0.3kg, 1kg but also the seven dynamic...

Brand Name:SAMYON

Model Number:HBX-0.5

Place of Origin:CN

... suitable to determine the hardness of heavy parts on the spot. Standard: ASTM E10-2018 Standard Test Methods for Brinell Hardness of Metallic Materials ISO 6506-2:2017 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:HBX-0.5

... Tester Brinell Testing Machine Hbx-0.5 Feature & Use: Small volume, convenient for carrying, easy operation Precision conforms to GB/T 231.2, ISO 6506-2 and ASTM E10 It can be used to determine the Brinell hardness of ferrous metals with elastic modulus ...

Brand Name:Gold

Model Number:GD

Place of Origin:Chongqing, China

... of pile Low strain pile integrity detection by reflected wave method (optional) The pile driving analyzer will provide prediction on the pile bearing capacity, pile integrity, driving stresses and hammer performance for a ...

Brand Name:Shengtai Instrument

Model Number:SD265B

Place of Origin:CHINA

...Tester Two Groupsof Tests SD265B With Standard Dynamic Viscosity Calculation Method SD265B oil kinematic viscosity meter manufacturing in line with the law of the People's Republic of China industry standard SY/T5651 the kinematic viscosity of petroleum products tester...

Brand Name:iqualitrol

Model Number:HBX-0.5

...Tester HBX-0.5 with Impact Energy 4.9J Main Features: 1, Small size, easy to carry, simple to operate; 2, Simple structure, durable, high test efficiency; 3, High-precision reading microscope measurement system. Scope of Application: 1, Determine the Brinell hardness of ferrous metals with an elastic modulus...

Brand Name:Lixian

Model Number:HZ-7039

Place of Origin:China

...Tester Machine Measured temperature range room temperature ~100℃ Thermal conductivity tester new HZ-7039A.pdf Thermal Conductivity Tester can be roughly divided into two categories: steady-state method and dynamic method.The tester uses steady-state method to measure the thermal conductivity of different materials. Its design method...

Brand Name:Gold

Model Number:EN

Place of Origin:Chongqing, China

...a lot of energy acting on the pile top and the directly measured impacting force is equal to the design limit value. The dynamic pile driving formula technique, wave equation method, Case method, curve fitting method CAPWAP, hammer penetration method, and

Place of Origin:China

Brand Name:chinacoal

...Dynamic Tester Indroduction ZBL-P8100 Foundation Pile Dynamic Testers is a kind of digital and portable dynamic tester using the low strain reflected wave method to test the integrality of concrete pile. True 24 bits A/D data acquisition ZBL-P8100 Pile Dynamic Tester Parameter Item Specifications Noise voltage of the system (mV) ≤2 Dynamic...

Brand Name:HUATEC

Model Number:HUH-6M

Place of Origin:CHINA

... information and clear display. Full English display, menu-type operation, few keys, simple and convenient to operate. For materials with different elastic modulus, only a simple point calibration is required to

Brand Name:iqualitrol

Model Number:HBX-0.5

... microscope measurement system. Scope of Application: ● Determine the Brinell hardness of ferrous metals with an elastic modulus approximately equal to 2×105MPa; ● Especially suitable for Brinell hardness testing of large parts at the work site.

Place of Origin:China

Brand Name:china coal

... the integrality of concrete pile.Dynamic tester is mainly composed of the host, the receiving sensor, excitation equipment and fittings (including power adapter, signal wire). Item Specifications Noise voltage of the system (mV) ≤2 Dynamic range (dB)

Brand Name:Infinity Machine

Place of Origin:Made in China

Baby Carriages Strollers Durability Tester Pushchair Dynamic Durability Test Machine, Pushchair Test Machine Application: Stroller durability tester machine is made according to CNS requirement. The test method: to put the infant model inside the stroller...

Brand Name:KEJIAN

Model Number:KJ-1066A

Place of Origin:Dongguan,China

Computer Controlled Electronic Servo Automatic Universal Testing Machine Uses: This machine also known as a materials testing machine , is applicable to testing tensile, compression,bending,peel, shearing force, peeling force, modulus of elasticity,and ...

Brand Name:HONGUM

Model Number:Customized

Place of Origin:CHINA

...: 1. Rubber has high elasticity and viscoelasticity; 2. Compared with the steel material, the rubber's deformation is large and its modulus is small; 3. The impact stiffness of rubber is greater than the dynamic stiffness, and the dynamic stiffness is