heating rate 1 30 minute polymer testing equipment

Brand Name:YUEXIN

Model Number:YX-IPX8-30A-940L

... the needs of various industries requiring precise and reliable immersion testing. With a power rating of 100W, this immersion soaking test chamber is equipped to handle rigorous testing procedures with ease. The main focus of this product is to provide a

Brand Name:Shengtai Instrument

Model Number:SH0545

Place of Origin:China

... time is only 2-3 minutes, which is much faster than traditional testing methods. The test range of 0-100% allows for a comprehensive analysis of crude oil. The power supply required is AC220V/50Hz, while the heating rate is 0.1-100 ℃/min. Features:

Brand Name:HongCe

Model Number:HJAU

Place of Origin:China

Heat Exchanger Vacuum Chamber Helium Leak Test System 30 s/pc Leak Detection Rate 1.0E-5mbar.l/s The series of system is able to run the following tests:A. leak detection with pressure decay method to find Gross Leaks; B. Helium test with mass spectrometer...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-BP

A. Product description: It is used to determine the MFR value of the melt flow rate through the standard die every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting ...

Brand Name:Shengtai Instrument

Model Number:SD261

Place of Origin:CHINA

PRODUCT DESCRIPTION SD261 70ml Sample Manual Closed Flash Point Tester ASTM D93 Heating Rate 1-12 ℃/Min The SD261 closed flash point tester is designed and manufactured in accordance with the requirements specified in the national standard GB/T 261-2008 &...

Brand Name:Sinuo

Model Number:SN1124

Place of Origin:China

IEC 60335-2-17 Blanket Spark Ignition Test Apparatus Product overview: This device meets the standard of IEC 60335-2-17, Clause 30.101 Figure 113 & 113a. It is used to inspect the flexible electrical heating appliance flammability, to test whether the ...

Brand Name:iqualitrol

Model Number:QTH-225KC

Energy Saving Climatic Temperature Cycling Environmental Test Chamber by PID Controlled Brief Introduction: Rapid change temperature testing specifies a test sample temperature variation rate of 15°C/minute or less, which is the biggest difference between...

Brand Name:HTI

Model Number:HTX-047

Place of Origin:Guangdong,China(mainland)

...Testing Equipment Shoes Sole Material Heat Insulation Tester Detailed Descriptions: The instrument used to detect the soles materials such as rubber, polymers etc. high temperature resistant ability. Principle: Sandbox is heated to 150 ℃, let sand cover sample vamp and the sole contact area, record the insole temperature changes over time in 30 minutes, accurate to 0.5 ℃ Specifications: Sandbox size: 400×400×80mm test...

Brand Name:DAXIAN

Model Number:DX8389

Place of Origin:China

...heating deformation testing machine Equipment use: This machine is used to test the degree of thermal deformation of materials such as plastics and wire sheaths. Test method: At a specific temperature, place the specimen freely in the testing machine for 30 minutes, then clamp it between the parallel plates of the machine, add the specified load, and place it at the same temperature for another 30 minutes...

Brand Name:SKYLINE

Model Number:SL-CFR

Place of Origin:China

16 CFR1633 Mattress Heat Emission Tester Product introduction CFR 1633 Mattress Heat Emission Tester. Two indicators should be set to limit the spread of flame on the mattress or mattress set. These two indicators are: the highest mattress/mattress set dur...

Brand Name:Kinte

Model Number:WH-8845

Place of Origin:Guangdong,China (Mainland)

3 Groups Cable Wire Tester Heat Deformation Tester 300 ℃ Room Temperature The instrument complies with the JIS-C-3005 test standard, the sample in a certain temperature of the machine, heated for 30 minutes, the folder between the parallel plate, plus the ...

Brand Name:HUATEC

Model Number:YM-A

Place of Origin:Beijing

penetrant calibration block test block PT test specimen developer,remover Model:YM-B All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable ...

Brand Name:JINHAIHU

Model Number:XRW-300B

Place of Origin:BEIJING, CHINA

... of high polymer materials, plastic,rubber etc, as an index of controlling quality and identifying thermal property of new products. Sample is immerged in liquid and fixed by a pressure needle. Heat liquid with specified heating rate, sample becomes

Brand Name:YUYANG

Model Number:YY - 03M

Place of Origin:China

Induction Hardening Annealing Gear Machine Flow Rate 7.5 liters Per Minute About this product: High Productivity: This 2500-3000 New Induction Furnace Heat Treatment Heater Family Heating Furnace is designed for high productivity, making it an ideal choice...

Brand Name:GAOXIN

Model Number:GX-3020-B

Place of Origin:Dongguan, China

Li-ion Battery Environmental Heat Shock Test Chamber Product Description The temperature rises at the predetermined rate to the testing temperature and hold on for some time. Use the hot wind circle to ensure the uniformity of the working temperature. Put...

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

... configuration, precise temperature control, better temperature gradient, longer life 4. According to national standard requirements, add four minutes after the addition of countdown function 5.

Brand Name:ZL

Model Number:ZL-1005

Place of Origin:China

...Heating Deformation Testing Machine For Plastics , Synthetic Resin Products etc. Equipment summary: Imposed load in high-temperature environments and measurement of changes in the amount of compression, the main test materials properties is suffered pressure at high temperatures. This equipment is used to study the material such as plastic, wire and cable placed at a certain temperature for 30 minutes...

Brand Name:MENTEK

Model Number:MVTH-1000

Place of Origin:China

... test chamber or temperature & humidity chamber with heating rate from 3°C to 20°C per minute or as a vibration chamber when seamlessly integrated with an electrodynamic shaker or vibration testing equipment.It can meet a variety of MIL-STD, ASTM,

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-Inspector

Place of Origin:China

353 NDA NDB Heat Curing Epoxy Fiber Optic Glue Patch Cords Production The 353ND fiber optic epoxy glue is use to fix the optical fiber and ceramic ferrule. There are 353NDA and 353NDB. These two type of glue need to fix togetther to use. The fixing rate...

Brand Name:DGBELL

Model Number:BTS2-50 / BTS2-80 / BTS2-150 / BTS2-250 / BTS2-330

Place of Origin:China

...Test Chamber +50～150℃<30 mins Pre-heating Zone Heating Rate Applications This equipment is widely applied to electronic and electric products, components and materials by constant high low temperature, temperature shock and rapid temperature change reliability test...