mud nbr stator and rotor

Brand Name:OHANG TECH

Place of Origin:CHINA

Rotor / Stator O.D.: 43-340mm Model Size Lobes Stages Tube OD Flow Rate Range Speed Range Rotation NBR-Stator HARD NBR-Stator Hole Size Range Thread Connections Operation Torque Operation Pressure Diff Max Torque Max Pressure Diff ...

Brand Name:KEMING

Model Number:KLW Spares

Place of Origin:CHINA

...stator and rotor for spraying and pump machine Rotor and stator Introduction: Rotor and stator can be made at client's requirement. And it is made of good meterials as following: Stator: NBR, EPDM, FPM/Viton etc. Rotor: carbon steel, 304/316/904 stinless steel, ceramic, stainless iron, duplex stainless steel etc. Rotor and stator Features: Rotor and stator is made of good meterials as following: Stator: NBR...

Brand Name:zonco

Model Number:customized

Place of Origin:China

...Stator & Rotor as MWD parts Working principle of tungsten Carbide Rotors And Stators: The inclinometer pulse generator is inserted into the current limiting ring through the control (mushroom head) gap to change the annulus cross-sectional area therebetween. The mud pressure flowing in the drill pipe is changed to form a positive mud pressure pulse to realize signal transmission. The mud

Brand Name:JS

Place of Origin:Hebei, China

...Mud Motor For Directional Drilling Product Description A downhole motor is a drill tool that converts hydraulic energy into mechanical energy through a power part, which consists of a stator and a rotor. The motor is usually divided into single blade (1/2) and multi-blade (N/N+1) according to the number of stator and rotor blades. In general, for motors of the same length of rotor/stator...

Brand Name:TR Solids Control

Model Number:TR-5LZ

Place of Origin:Xi'an China

...Mud Motor With Connection 3 1/2 REG BOX​ Product Descrption Downhole Mud Motors, also called Positive-Displacement Motors (PDM), make use of a power generation section which is made up of a rotor/stator combination. In order to move a rotor part, a PDM requires hydraulic power from drilling fluid flowing through the power generation part. With a PDM, the stator and rotor work in tandem in the same way that gears do. The stator...

Brand Name:DENOR

Model Number:DENOR-ZZB

Place of Origin:China

...Rotor Pump Horizontal Mud Small Oil Slurry Seal Sludge Vacuum Rubber Stator Rotor Pump Product introduction The material and form design of the rubber rotor pump, also known as wear-resistant rotor pump, wear-resistant slurry pump, and rotor pump's special wear-resistant rotor provide a perfect conveying solution for working conditions that require wear resistance. Moreover, the rubber rotor...

Categories:Drilling Mud Motor

Country/Region:china

The motor consists of a stator and a rotor. The stator is made by injecting a rubber bushing on the inner wall of a steel pipe, and its inner hole is a spiral with certain geometric parameters; the rotor is a screw with a hard layer. The rotor and the ...

Brand Name:AIPU Solids

Model Number:APG

Place of Origin:China

... with a rotor and stator. The rotor and stator are combined together and rotate within a cylindrical cavity or liner. The fluid or transfer medium enters from the suction side of the screw pump and moves linearly along these intermeshing screws/rotors to

Brand Name:ATO

Place of Origin:CHINA

Screw pump Stator Outer Diameter 102 Max Viscosity(50) 7000 Descriptions of Screw pump Stator Outer Diameter 102 Max Viscosity(50) 7000: GLB progressive cavity single screw pump is a new type of mechanical extracting equipment, applicable for the oil ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

Downhole Motor or Mud Motor Product Description Usage It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field...

Brand Name:RICITE

Model Number:X

Place of Origin:China

... motor and a pump as a whole, with the inner surface of the stator and the outer surface of the rotor covered by a thin-walled non-magnetic corrosion-resistant metal thin cylinder. The stator winding and rotor core are completely separated from the