Home Rs485 Lightning Protection , Ethernet Surge Arrester High Transmission Rate

Home lightning protection signal protector, control signal, lightning protector, RS485 lightning arrester.

Brief introduction

The control signal lightning arrester is a lightning protection measure developed by Zhejiang tohr Electric Co., Ltd., which is independently developed for signal circuit protection. It is used to protect all kinds of voltage connected control signal devices sensitive to electromagnetic interference, which can protect the sensitive control signal lines from the damage caused by lightning overvoltage, induced overvoltage, overcurrent, electrostatic discharge and so on, and effectively protect the equipment.

Product features

1. low insertion loss (less than 0.5dB).

2. The transmission rate is high and the frequency range is large.

3. the reaction speed is fast.

Product specification

Working principle of product

The control signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.

Use of attention

1. lightning arrester grounding with the shortest possible line connection. The protector grounding adopts terminal grounding mode, and the grounding wire must be connected to the lightning protection ground wire (or the enclosure of the protected equipment). The shielding wire of signal can be directly connected to the grounding terminal.

2. the lightning arrester is not required for long-term maintenance without longer maintenance. It only needs the routine maintenance of the system. In the process of use, the signal transmission is problem, the signal transmission is restored to normal after the surge protector is replaced, indicating that the surge protector has been damaged, and it needs to be repaired or replaced.

3. please recognize the interface and the way of connection.

Company profile

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.