Constant Temperature Humidity Frequency Conversion Factory Air Conditioner 18-25C

PCB Board Clean Room Air Conditioner Frequency Conversion Factory Air Conditioner Three-Phase380V/~/50Hz

Factory Air Conditioner s used for indoor air conditioning under various environmental conditions, and has multiple functions such as cooling, dehumidification, heating, humidification, and ventilation. Temperature control range: when the temperature is set at 18-25°C, the control accuracy is ±0.5-1°C, the relative humidity is set at 50-70%, and the control accuracy is ±5-10%.

Factory Air Conditioner Cooling principle:

When the refrigeration system is working, the high-temperature and high-pressure R410 gas discharged from the compressor enters the condenser and is condensed into a medium-temperature supercooled liquid.

Factory Air Conditioner Dehumidification principle:

Heating: start the heater, when the air flows through the heater, the air is heated and the temperature rises.

Humidification: Start the humidifier, and the water vapor generated by the humidifier is continuously sent into the room by the fan to achieve the purpose of humidification..

Technical Parameters

Factory Air Conditioner Features
Factory Air Conditioner Advantage:
1. Few limitations. Small areas can be directly blown by small cooling capacity cabinet machines, and large areas can be cooled by large cooling capacity direct blowing machines, duct machines or horizontal machines.
2. Easy to maintain, easy to install, easy to clean and not easy to break down
3. Less investment in the early stage and low cost in the later stage. Our machines are cheaper than traditional air conditioners with the same cooling capacity. In the later period, it can save electricity by 30%-50% compared with traditional air conditioners. It can save electricity by 15% compared with central air conditioners.
4. Good cooling effect and fast cooling speed. The air volume is large, and the air supply is far away.
5. The temperature can be adjusted according to the demand, and it has a dehumidification effect.
6. Different solutions can be used in different environments according to requirements. The direct blowing type of the traditional air conditioner can be used to cool down the overall temperature in a sealed condition. Post air supply using environmentally friendly air conditioners cools down at designated workplaces. The central air supply type using the central air conditioner is more beautiful. We will come up with solutions according to what customers need.
7. Does not take up space. One of our 125 series machines can manage 100-130 square meters. The indoor unit can be installed on the floor indoors, hung on the wall, or placed outdoors.
8. There is no requirement for the degree of sealing, the overall cooling of the sealed environment is direct blowing, and the post-type air supply is used for regional cooling in the unsealed environment.
9. Simple maintenance and low maintenance cost. Important components such as the compressor are in the internal machine, so there is no need to work outdoors at high altitude.
10. The compressor load is small, the failure rate is low, and the service life is longer.
shortcoming:
There are requirements on water quality and tap water is required.

Factory Air Conditioner Application

The unit has a variety of models to choose from, and can be widely used in the air conditioning needs of electronic factories, hospitals, pharmaceutical factories, printing factories, post and telecommunications, banks, computer rooms, power supply and distribution stations, communication stations and other buildings.

Dongguan Lixian Instrument Scientific Co., Ltd. is one of the national leading manufacturers of advanced testing instruments, which was found in 2000 and located in Dongguan, Guangdong province of China.
Our manufacturer locate in Dongguan city,covers an area of 6000 square meters, take the lead in introducing the CNC processing center and NC lathe and other advanced equipment in 2010. Carried on several listed company lab, quality institutions,Tsinghua University, Aeronautics University's project. We have more than 3000 buyers in domestic market,succeed in eastablishing the branch companies and maintenance department in Dongguan, Shanghai, Beijing, Jinjiang, Wuhan, Chongqing, Shenyang, Changsha, in the same time, we have shoeroom and stock in Dongguan, Beijing, Shanghai company.
Our products have achieved CE/ISO/ASTM/ROSH/UL certification, exported to USA, Germany, South Korea, Greece, India, Singapore, Brazil, Iraq, Saudi Arabia and other more than 60 countries.
Our machines are specially designed for many different material research and quality control,such as metal, textiles, rubber, adhesives, foodstuff and finished components and so on. A whole series of tests including tension, shearing, compression, flex / bending, tearing, peeling, friction, stiffness, vicat penetration and torsion are available by our machine. Throught our work hard and study, Dongguan Lixian Instrument Scientific Co., Ltd. has maked progress in the software and hardware of our machine, which accuracy has reached international advanced level and collection resolution has reached to 1/500000. Dongguan Lixian Instrument Scientific Co., Ltd. has the leading product development and reliable quality management system,which introduced the CNC processing center and CNC lathe and other advanced equipment in 2010, successfullly obtained the CMC measurement certificate and passed ISO 9001 system authentication.

The main products of Dongguan Lixian Instrument Scientific Co., Ltd. are material testing machines, salt spray testing machines, shoe testing machines, leather testing machines, packaging testing machines, mobile phone and computer testing machines, textile testing machines, rubber testing machines, stroller testing machines, and sports equipment testing machines. Our products are widely used in rubber & plastic, automobile production, medical equipment aerospace, colleges and universities, foodstuff, building materials, packing and other manufacturing industries.