250KHZ Industrial Ultra High Frequency Induction Heating Machine Environmentally Friendly

Clean And Pollution-Free 50-250KHZ Ultra High Frequency Induction Heating Equipment

INDUCTION HEATING:

The ultra high frequency induction heating machine is a type of induction heating machine, with a frequency ranging between 200 kHz and 500 kHz. According to different heating processes of customers, we will adjust the frequency. The maximum frequency can reach 800 kHz, which can achieve a good surface heating effect, and the heating depth ranges between 0.3 mm and 1 mm.

MAJOR FEATURES

• Micro parts can be heated. It can heat iron wire, steel wire, steel strip, miniature shafts, silver wire, fine gold and silver jewelry, and more.
• The surface heats up quickly. Its skin effect is more obvious, which can quickly heat the surface of the workpiece, so it is very suitable for surface hardening.
• High frequency. The highest frequency can reach more than 800 kHz, and the heating efficiency is high.
• Flexible. Small size, equipped with casters, easy to move.
• Self-protection function. Monitor current, voltage, water temperature, etc. When failure occurs, it can automatically alarm and stop running.

POWER REQUIREMENTS:

The power required to heat your work piece depends on:

• The mass of your work piece
• The material properties of your work piece
• The temperature increase you require
• The heating time required to meet your process needs
• The effectiveness of the field owing to the coil design
• Any heat losses during the heating process

After we determine the power needed to heat your work piece we can select the correct induction heating equipment taking the coil coupling efficiency into consideration.

THE PARAMETERS OF THE GYH-20AB:

ADVANTAGES OF HOT FORMING WITH INDUCTION HEATING:

• Fast heating
• Small heating depth
• Repeatability
• Consistent results
• Clean and pollution-free
• No flame

INDUCTION HEATING IN HOT FORMING IS APPLIED FOR DIFFENRENT PURPOSES:

• Heading - forming a head on blot, screw or rivet
• Blanking - cutting a whole piece from sheet metal
• Punching - cutting a hole
• Slotting - cutting of elongated holes
• Perforating - cutting a group of holes
• Trimming - cutting away excess metal
• Shearing - cutting in straight line across piece
• Bending - producing single, double, straight flange, edge hem, curl or double hem bends

Our services

Pre-sale service.
1.Inquiry and consulting service
2.recommend the most suitable for our customers according to their requirements
3.Sample testing support
4.working videos available
5.View our factory

In-sale service.
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.

After-sale service.
1. Warranty time: 1year Warranty.

2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.

Founded in 1996, Guangyuan Technology (HK) Electronics Co., Ltd. is a private high-tech factory. Our factory is located in Wanjiang District of Dongguan City in Zhujiang Delta, with convenient transportation near No. 107 national highway and Guangshen speedway.

We have established an R&D system. It is supported by advanced engineers and professional workers, who are especially engaged in researching and developing the machinery of middle or high frequency induction heating and high frequency inverter electrolysis and galvanization power supply. Since we owned strong technique development capability, our factory has been insisting on producing new product and new craftwork to assure our leading position on technique in this field.

Under the effort of several years, our factory has produced series of high quality products in various categories. We can also exclusively produce these products on your requirement to meet you need. Our middle or high frequency induction heating equipment is produced for special voltage condition of some countries. For instance, there is single-phase 110V, three-phase 220V induction heating equipment for America and Japan and three-phase 415V, 440V induction heating equipment for such southwestern Asia countries as Malay and Thailand.

Our factory has a wholesome distribution network. Our products are delivered to America, Europe and southwestern Asia areas. We also built up a lot of offices to provide prompt and quick service to our consumers.

At the beginning of our foundation, we advocated "work with honest and credit, service for ever". This slogan has deeply footed in the culture of our factory, becoming the soul of development and management. During the process of development, it is firmly believed that a wonderful after-sale service is the base stone for a company's existing. Therefore, our factory takes the thought of "creating values for costumers" as the core of our managing strategies.

Chinese companies are facing the competition and challenge from the whole globe. Our factory will use advanced technology to provide better after-sale service and to find a proper position in the international market. We will hold the spirit of more professional, advanced and perseverant to pursue the wide application of our products in the market. We will also pursue the co-development and advancement with our suppliers and consumers relying on professional technology and good cooperation efforts.