Electrical Insulator Mould Release Agent , Viscous Casting Chemical Auxiliary Agent

CE Certificated Tansformers CT PT Casting Mold Mould Release Agent for Electrical Insulators

TDS:

Performance parameters:

Product Description:

JT 6101 Organic Silicon Mould Release agent

Features:

Good release effect

high stability

No reaction with the casting material

Not corrode the mold

Environment protection and without pollution

Process:

1. Remove grease and wax thoroughly with solvent to ensure the mould cavity clean and dry

2. For the new mould, initial using need to spray for 3-4times(After the solvent evaporation and then spray brush again),after that one mould to spray one time or several moulds to spray one time(several moulds to spray one time: normally paint one time after the mould poured 2～10 times)

3. When a thin coating can be formed on the surface of the mold cavity by the method of spraying or brushing, then it is ok

Packing:

5KG/ pot,20kg/drum

Storage:

Products need to be stored in a dry and ventilated environment with 18-40℃, and the shelf life is 1 year

Hubei Plant and Guangdong plant:

ISO certificate:

Part of our customers:

FAQ:

1. We’re using Huntsman epoxy resin, can I use JiangTe resin?

Yes,ours are equivalent to Huntsman. Please tell the number of Huntsman you’re using, we’ll offer the one matching.

2. What’s the pot life?

Pre-filled resin is one year; Pure resin is 2-3 years.

3. We’re just starting producing. Can you help us on the process?

No problem, we’ll offer guidance and support. We have thousands of customer manufacturers in China and overseas.

So we have good experiences.

Introduction

Established in 1998, Jiangte Insulation Composite Co., Ltd is high-tech enterprise engaging in the development, production and sale of electrical epoxy resin.

After more than 30 years of efforts, JiangTe has introduced a variety of electrical epoxy resin products which have been widely used in the manufacturing of dry type transformers, instrument transformers, medium to high voltage insulation parts and solid switchgears.

To provide the very best service, Jiangte has set up two production plants in Hubei and Guangdong producing more than 50 electrical epoxy resin line with an annual capacity exceeding eighty thousand (80000) tons. JiangTe is the most professional and the leading manufacturer of electrical epoxy resin in China.

JiangTe's two plants have received the ISO9001 quality system certification and ISO14001 environmental management system certification and are careful to meet all local and international health, environment and safety standards.

Additionally , JT has established a comprehensive Research and Development Center with a large selection of advanced testing equipment for their highly skilled research and production teams.