ASTM A210 / ASME SA210 GR.A1 GR.C Carbon Steel Seamless Tube Cold Drawn For Boiler

ASTM A210 / ASME SA210 GR.A1 GR.C CARBON STEEL SEAMLESS TUBE COLD DRAWN FOR BOILER

The CS grade boilers are widely used in various industrial applications due to its highly unmatched properties. There are several properties exhibited by them are excellent corrosion resistance, strength resistance, crevice corrosion resistance, stress crack corrosion resistance and excellent strength. The most preferred choice CS grade for manufacturing boilers is Seamless medium carbon steel boiler 210-A1.

ASTM A210 / A210M Grade A-1 Chemical Compositions

ASTM A210 / A210M Grade A-1 Mechanical Properties

ASTM A210 / A210M Tube Wall Thickness Tolerance

The specified ASTM A210 GR.A1 Seamless Steel Tubes are designed to be used in several applications as either boiler or as superheater tubes. The ASME SA210 Gr A1 Superheater Tubes that are manufactured under this specification also covers minimum wall thickness, and tubing sizes, boiler flues including e ends, arch as well as stay tubes. While the specification for these ASME SA210 Grade A1 Pressure Vessel Tubes takes into account both the tensile strength and hardness properties but these two properties are applicable to certain size limitations. Material used in the manufacturing of ASTM A210 Grade A1 Heat Exchanger Tubes are to be killed. The ASTM A210 Grade a1 tubes are to be produced by seamless process, which in turn are to be marked as either hot finished tubes or cold finished tubes.

Application

SA210A1 is a Seamless medium carbon steel Boiler Tube used in super heater, heat exchangers, condensers, marine application, refineries, paper pulping, petrochemical applications, pressure vessels, and general engineering applications.

Ordering Information

Orders for ASTM A210 / A210M, ASME SA210 should include the following, as required, to describe the desired material adequately:

• Quantity (feet, meters, or number of lengths),
• Name of material (seamless tubes),
• Grade,
• Manufacture (hot-finished or cold-finished),
• Size (outside diameter and minimum wall thickness),
• Length (specific or random),
• Optional requirements,
• Test report required (see section on Certification of Specification A 450/A 450M),
• Specification designation,
• Special requirements.
•