3L 0.5lpm Medical Oxygen Concentrator , Oxygen Concentrator Machine 5l

CONTEC Oxygen Concentrator Ambulance And Hospital 10L Built-In Filter Oxygen Concentrator

Product Description

CONTEC21 Oxygen Concentratorconsisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter. Withthe molecular sieve to be absor-bent, the machine adopts PSA(pressure swing absorbers )method to directly concentratemedical oxygen with high concentration from the air. It is small and portable. The machine takes the advantag-es of small in volume, light in weight, convenient in moving(as it has turning truckle), stable in performance,high insafety, easy in operating, low in noise, safe in working,which complies with requirements of medical device.

Product Specification

Common Feature

• Maximum flowrate recommended: 5L/min
• Oxygen Output Concentration Levels: (reach the stated oxygen concentration level within 30 minutes after turning on the machine): 93%士3% at the flowrate of 0.5~5L/min.
• Flowrate range: 0.5~-5L/min

• Class ll equipment Type of protection against electroshock.
• Type BF applied part degree of protection against electroshock.
• IP21 Degree of protection against ingress of water.

• With working indicator.
• Oxygen concentrationstatus indicator.
• Built-in filters topure the gas.
• Function of accumulating time.
• Function of timing shutdown.
• Alarm for power failure.
• Alarm for high/low pressure protection.
• Alarm for low flowrate.
• Alarm for high temperature.

Product Picture

FAQ

Q1: How long will it take to produce the product?

A: It will usually take 7-10 days for order less than 20,000 pcs; 14-21 days for 20,000 to 100,000 pcs; for order more than 100,000 pcs will take around 30-45 days depends on the customized requirements.

Q2: How should buyer pay to us?

A: We could accept T/T transfer, Credit Card, Debit Card, Western Union, Paypal and Money Gram. And we could accept 30% deposit before start to produce, and 70% balance before the product leave our factory for order more than 20,000 pcs, and we can accept factory and product inspection. We don't accept L/C payment method now.

Q3: What trade terms do we support?

A: Theoretically we can accept all the terms, but what we do most is FOB and CPT, for some country we could offer DDP, like the USA, UK, Australia, France and so on. If you want check whether your country on the list, please contact our customer service staff.

Q4: How long will it take to delivery the product?

A: That will depends on what shipping method you choose, usually sea shipping will take about 30-35 days to delivery to the port, but DDP sea shipping will take longer because they will need to delivery the product to your appointed address, usually it will take about 35-45 days, depends on the distance between the destination country and China. By air cargo will be much sooner, usually it will take 5-10 days to delivery to the appointed airport. Air Express will depends on the country delivery to, like European and North American countries, usually it will take 3-12 days. For Southern east countries, it will take about 2-9 days. For Africa and South American countries, it will take longer. Australia will need to see the local custom policy, usually it will take about 7-12 days.

Q5: What if I receive the product broken?

A: If you receive the product broken, please don't worry. We have three policy to protect your benefit.

1) If the damage rate is less than 5%, we will offer some discount in your next order as compensation.

2) If the damage rate is more than 5%, we could refund you equal value amount or give you the equal quantity product for free in you next order.

3) If you need the product urgently, we could resend the same quantity of the damaged product for free, and we share the shipping cost 50% each side with our customer.

We are an enterprise providing medical devices and consumables solutions for hospitals and medical institutions. We were founded in 2007. Up to now, our products have covered most departments of the hospital, and we can develop and customize products according to client's actual needs. We strive to improve the quality of products and solve the problem of integrated construction of medical facilities for more countries.