Cigarette Paper Adhesive Gluing Unit For Paper Adherence Assembled

Cigarette Paper Adhesive Gluing Unit For Paper Adherence Assembled

Glue Applicator is a component assembled in both cigarette makers and packers, applying glue to different paper materials.

1. Ferric Oxide For

hot melt adhesives provide several advantages over solvent-based adhesives. Volatile organic compounds are reduced or eliminated, and the drying or curing step is eliminated. Hot melt adhesives have long shelf life and usually can be disposed of without special precautions. Some of the disadvantages involve thermal load of the substrate, limiting use to substrates not sensitive to higher temperatures, and loss of bond strength at higher temperatures, up to complete melting of the adhesive. This can be reduced by using a reactive adhesive that after solidifying undergoes further curing e.g., by moisture (e.g., reactive urethanes and silicones), or is cured by ultraviolet radiation. Some HMAs may not be resistant to chemical attacks and weathering. HMAs do not lose thickness during solidifying; solvent-based adhesives may lose up to 50–70% of layer thickness during drying.

2. Properties

Melt viscosity

One of the most noticeable properties. Influences the spread of applied adhesive, and the wetting of the surfaces. Temperature-dependent, higher temperature lowers viscosity.

Melt flow index

A value roughly inversely proportional to the molecular weight of the base polymer. High melt flow index adhesives are easy to apply but have poor mechanical properties due to shorter polymer chains. Low melt flow index adhesives have better properties but are more difficult to apply.

3. Glue Pot Stability

The degree of stability in molten state, the tendency to decompose and char. Important for industrial processing where the adhesive is molten for prolonged periods before deposition.

Bond-formation temperature

Minimum temperature below which sufficient wetting of substrates does not occur

COMPANY PROFILE

HK UPPERBOND INDUSTRIAL LIMITED, an innovative company that specializes in manufacturing and distribution of tobacco machinery and spare parts, as well as providing top-notch technical services to tobacco industry.

Our comprehensive range of products includes Heat-Not-Burn equipment, cigarette production equipment,filter rod maker, tobacco primary line, and shisha equipment. Each product is meticulously crafted to meet the requirements and standards of the tobacco industry.

Furthermore, we understand that the tobacco industry is ever-evolving, and we are ready to adapt to the changing landscape.

Our knowledgeable team stays informed about the latest industry trends to provide our customers with cutting-edge solutions that meet their specific needs and requirements.
 

Since established in 2007, our primary focus has been to continuously work towards becoming a reliable and preferred supplier by maximizing customer satisfaction. By consistently delivering high-quality products and exceptional services, we have earned the trust of our valued clients from Europe, America, Middle East, Africa,Southeast Asia.

Our mission:
Committed to technology and service innovation, create great value for customers
 

Our vision:
To be the most reliable partner in the industry

Strength Factory

We provide spare parts for cigarette making and packing machines, including Protos, Molins Super 9, MK95, MK8, MK8D, Passim, GD X2, HLP, Sasib, Focke

Exhibition

CUSTOMERS

CERTIFICATES