Household Appliances 12.8mm Snap Action Disc Thermostats 250V 10A 16A

250V 10A 16A Snap Action Thermal Disk Switch For Household Appliances

Quick Detail:

Description:

KSD301 thermal switch’s Principle and structure

The main principle of KSD301 series thermostat is that one function of bimetal discs is snap action under the change of sensing temperature. The snap action of disc can push the action of the contacts through the inside structure, and then caused on of off the circuit finally. The main characteristic are the fixation of working temperature, the reliable snap action, less flashover longer working life and less radio interference.

It is widely used in rice cooker, microwave oven, electric water boiler,room heater, egg boiler and electric steamer,etc.

KSD301 thermal switch’s application

1.Household electric appliances: water dispenser,electric water pots,toaster,dishwasher,drying machine, disinfection cabinet, microwave oven, electric kettle, electric caldron, refrigerator,air-condition,laminator etc.

2. Office equipment

3. Car seat heat, car deicer

KSD301 thermal switch’s specification

1. Electrical Rating: AC 125V max 15A; AC250V 5A 10A 15A max 16A

2. Action Temperature: -10~300 ℃, Temperature accuracy: ±3 ±5 ±10℃.

3. Recovery and action temperature difference:

A. Auto reset: 8 to 100℃(Optional),Temperature accuracy: ±3 ±5 ±10℃.

B. Manual reset

4. Terminal

a. Terminal type: 187series of 4.8*0.5mm and 4.8*0.8mm, 250 series of 6.3*0.8mm

b. Terminal Angle: bending angle: 0~90°C optional

5. Life cycle: ≥100000

6. Dielectric Strength: AC50Hz 1500V / min, no breakdown blinding (Normal State)

7. Circuit resistance: ≤50mΩ

8. Insulation resistance: ≥100mΩ

9. Normally closed or Normally open

10. Protection degree: IP00

11. Two kinds of body: plastic or ceramic.

12. Temperature sensor face: Aluminum cap or copper head.

13. Holder: without holder, free holder, fixed holder.

Specifications:

1. Dimensional Outline

2. BOM

3. Action Temperature Table

Competitive Advantages:

1. Small size and expedient installation

2. High temeprature resistance

3. High reliability, Durable

4. ROHS compliant

5. Wide application

6. No arcing

7. Long life and less disturb to wireless.

Applications:

● Kitchen Appliances: Rice Cooker, Microwave Oven, Oven, Fryer, Egg Boiler, Electric Steamer, Vacuum Cleaner, etc.

● Household Appliances: Electric Water Boiler, Room Heater,Waffle Baker etc.

● Other Industry: Medical Equipement, Air Compressor, Batter Packs, Water Tank, Frostproof closet, etc, Fuel Filter, etc.

Installation and Direction for Use:

Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.
The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.
When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover’s surface.
If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat’s insulation parts.
The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat’s temperature sensitivity or its other functions.
Liquids must be kept out of the thermostat’s inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.
The terminals should be bent, or else, the reliability of electric connection will be influenced.

Tag:

Thermal Disk Switch, Bimetal Thermostat,Temperature Switch,Temperature Cutoff Switch, Thermal Cutout Switch

Dongguan Yusheng Electronics Co., Ltd.

Dongguan Yusheng Electronics Co., Ltd. is located in Dongguan, Guangdong, China. We are specialized in snap disc thermal switches, bimetal thermal protectors, electric motor thermal switched, miniature thermal switched, EMI EMC filters, NTC temperatture sensors and all kinds of fuses. Our products are widely used in household appliances, motors, lighting appliances, heating appliancese, transformers, electric tools, power supplies, automotive equipment, communications devices, medical devcices, toys and etc.

All of our products are CE certified and ROHS compliant. Our products have got CQC, UL, VDE, TUV, KC , CB certifications and passed ISO9001:2000, ISO / TS16949 and ISO 14000 certification of quality system. And all of products will be tested 100% before shipment. Product advantages: miniature sieze, easy mounting, high precision, fast reaction, long life cycle, rapid heat transmission, no breakdown, no flashover, and wide application.

Quality is life, service is the soul. Safe and reliable is our eternal pursuit.